Products

Innovative Technologies. Trusted Performance.

We have a deep understanding of various application characteristics of communication base stations. Excellent in stability and safety, low cost, our communication base station specific batteries make us the unique supplier for the three major operators domestically and an excellent partner recognized by China Tower. Adhering to the idea of “quality up but cost down”, our company has been a leading player in the communication power supply sector for many years.

SFP28 25G CWDM 1271-1371nm 10km

The transceiver is intended for 10km reach service from 24.33Gb/s to 25.78Gb/s single mode high-speed communications equipment where low-cost, extraordinary performance and reliability are essential. It utilizes internal clock and data recovery (CDR) units on transmitter and the receiver chains for low jitter compliance. The differential AC coupled Tx and Rx data interfaces are CML compatible. The device is Class I laser safety compliant.

SFP28 25G BIDI 1270/1330nm 40km

The transceiver is intended for 40km reach service from 24.33Gb/s to 25.78Gb/s single mode high-speed communications equipment where low-cost, extraordinary performance and reliability are essential. It utilizes internal clock and data recovery (CDR) units on transmitter and the receiver chains for low jitter compliance. The differential AC coupled Tx and Rx data interfaces are CML compatible. The device is Class I laser safety compliant.

SFP28 25G BIDI 1270/1330nm 20km

The transceiver is intended for 20km reach service from 24.33Gb/s to 25.78Gb/s single mode high-speed communications equipment where low-cost, extraordinary performance and reliability are essential. It utilizes internal clock and data recovery (CDR) units on transmitter and the receiver chains for low jitter compliance. The differential AC coupled Tx and Rx data interfaces are CML compatible. The device is Class I laser safety compliant.

SFP28 25G BIDI 1270/1330nm 10km

SFP+ 10G RJ45 100m

SFP+-10GBASE-T Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA). They are compatible with the 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T standards as specified in IEEE Std 802.3. SFP+-10GBASE-T uses the SFP’s RX_LOS pin for link indication. If pull up SFP’s TX_DISABLE pin, PHY IC be reset.

SFP+ 10G Dual 1550nm 80km

The SFP+ transceiver provides 10GBase-ZR throughput up to 80km over single-mode fiber (SMF) using a wavelength of 1550nm via an LC connector. Digital optical monitoring (DOM) support is present to allow access to real-time operating parameters.The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI.

ZTT develops reliable and intelligent transmission and distribution networks to enhance the global power grid. Guided by three core principles—safety and efficiency, sustainability through reduced carbon emissions, and smart technology integration—ZTT delivers innovative solutions that redefine energy transmission.

Copper Wire

A full set of high-purity copper single wires, manufactured using a fully automatic wire drawing machine, is suitable for high-end wire and cable applications and other fields.

Copper Rod

High-purity copper rods engineered for superior conductivity, mechanical durability, and versatile applications in wire drawing, electrical components, and renewable energy systems. Manufactured under strict international standards.

Intelligent Grounding Box

Manage and monitor grounding system. It i normally used for remote monitoring, fault alarm and analysis.

245kV Cable Joint

Applicable to connect the extruding HV cables each other, suitable for XLPE or EPR insulated cables with copper, aluminum or aluminum alloy conductors.

Screened Armored Control Cable

Screened armored cable combines the advantages of screen and armor, It can not only resist interference and electromagnetic radiation, but also has the characteristics of durable and withstand external force.

Unscreened Unarmored Control Cable

Control cable is a type of cable that connects from the control center to various systems to transmit signals. It is used in control, monitoring, and protection circuits with a rated AC voltage of 450V/750V or below.Due to the characteristics of unscreened unarmored cable, which has advantages in certain specific applications.

Enjoying precise scheme design, lean production control and refined industrial chain layout, our energy storage battery products can be used in various scenarios such as user side and power generation side.

With the certifications of UL, 9540A and TUV, high stability and high safety throughout the life cycle(4000~10000 times) have been achieved, suitable for 0.25P~1P application.

20-Foot Hybrid Capacitor Energy Storage Container (4MW10min)

Energy Storage:One (1) 4 MW 10 min ultra-capacity Lithium-Ion Capacitor (LIC) bank.Power Conversion:Two (2) integrated 2 MW step-up converter units.Cabling:Four (4) complete sets of internal cabin cables.

25-Foot Supercapacitor Energy Storage Container (5MW30s)

Standardized Electric Double-Layer Capacitor (EDLC) compartments, combined with matching power compartments, form a dedicated grid-frequency-regulation energy storage system.

ZTT-NG54CDB-470-485W

N type BC dual glass module for residential applications.Its grid free front surface delivers a full black aesthetic. Balancing high efficiency with superior weather resistance, this module effectively addresses residential rooftop challenges – including partial shading, summer heat, and aesthetic requirements – making it an ideal choice for homes and small C&I rooftops alike.

ZTT-NE66CD-640-670W

N-type BC cell flagship product featuring high efficiency and premium appearance. It is suitable for ground-mounted centralized PV plants and commercial & industrial rooftop distributed PV projects. Supported by intelligent automated production lines, it improves production efficiency, reduces manual intervention, strictly controls manufacturing costs, and guarantees consistent product quality across all batches.

ZTT-ND54HDB-425-450W

N type TopCon Flagship Series for Residential Applications，Compact and highly efficient, this module maximizes energy yield within limited rooftop spaces. Its sleek, homeowner oriented design ensures seamless integration with residential architecture, while the robust build quality guarantees long term, maintenance free performance for small scale distributed PV systems.

ZTT-NE66OD-620-655W Offshore PV Module

Engineered for harsh marine and intertidal environments, this series withstands high salt spray, intense UV radiation, and extreme wind loads. Its dual glass design – featuring salt mist resistant frames, water blocking films, and IP68 junction boxes – ensures stable, long term performance for offshore PV modules.

ZTT’s submarine fiber optic cables provide high-speed, low-latency connectivity for global telecom and offshore energy networks. Designed with high fiber counts, robust protection, and advanced signal technology, they withstand deep-sea pressure, abrasion, and harsh marine conditions.

Repeatered Submarine Fiber Optic Cable

ZTT’s Repeatered Submarine Optical Cable has obtained international UJC certification. It is suitable for intercontinental transoceanic long-distance, low-loss, high-bit-rate repeatered submarine communication systems, as well as subsea observation networks and marine three-dimensional monitoring systems.It supports up to 96 optical fibres, with a maximum operating voltage of 20 kVDC and maximum deployment water depth of 8,000 m. The product range includes DA, SA, LWP and LW cable types.

Photovoltaic Cable, Solar Power Cable

Instrument & Control Cables are signal transmission cables specially designed for onshore petroleum and natural gas exploration, extraction, production, refining, storage and transportation facilities, as well as other industrial applications. They are primarily used to connect field instruments, sensors and actuators to control systems to transmit monitoring and control signals

Photovoltaic Cable, Solar Power Cable

Photovoltaic DC special cable, using irradiation cross-linked double insulation sheath, resistant to ultraviolet rays, weather aging, high and low temperature adaptability, soft and easy to lay, suitable for household, industrial and commercial and large-scale ground photovoltaic power stations, supporting multi-specification, multi-certification supply.

rolling stock cables

Rolling Stock Cables are suitable for fixed installation and cross connection installation of power, control and communication systems for various railway rolling stock and urban rail transit vehicles, and has excellent low smoke and halogen-free, mineral oil and fuel oil resistance, as well as dynamic flexibility performance.

Flexible Wind Turbine Power Cable

Flexible Wind Turbine Power Cables are specially engineered for wind turbine tower and nacelle internal wiring, rated up to 132 kV. It features fine-stranded copper or aluminum alloy conductors, EPR insulation, and CPE outer sheath. Designed for continuous flexing and tight bending radii, it maintains stable performance under vibration, mechanical stress and wide temperature swings (-40℃ to +105℃). Flame-retardant, oil-resistant, UV-resistant and halogen-free (LSZH optional) versions are available to meet international onshore and offshore wind standards.

Marine & Offshore cables

The Marine & Offshore cable (up to 30kV) are primarily used for power transmission, circuit systems, control systems, instrumentation equipment, and communication systems in commercial marine and offshore equipment applications.The Marine & Offshore cables meet the international standards of IEC 60092-350/353/354/376, and Industry standard of NEK TS 606 etc, and can be manufactured according to customers’ requirements. The marine and offshore cables have been approved by major classification society such as ABS, BV, CCS, DNV, KR, LR, NK, RINA etc. ZTT also can produce other special cables such as Coaxial cable, Ethernet cable, BUS cable, OPLC, Shore power cable, Port Machinery cable etc.

Material Box Intelligent Warehouse Solution

Intelligent storage with bin-type stacker cranes utilizes bins as storage and retrieval units, achieving high-precision automatic storage and retrieval, high density and space-saving, efficient and stable operation, and adaptability to multiple types of small materials, enabling intelligent and automated management of the entire storage process.

Pallet-Based Intelligent Warehouse Solution

Pallet stacker intelligent warehousing utilizes pallets as the load-bearing unit, enabling high-level three-dimensional storage, fully automated storage and retrieval handling, stable and efficient operation, significantly increasing storage capacity, adapting to bulk palletized goods, and achieving intelligent unmanned warehousing operations.

Four-Way Shuttle Car Intelligent Warehouse Solution

The intelligent storage system utilizing four-way shuttles eliminates the need for fixed aisles, allowing for flexible movement in all directions. It features fully automated storage and retrieval, high-density three-dimensional storage, and compatibility with multiple specifications of material boxes and pallets, enabling flexible, intelligent, and unmanned warehouse operations.

AGV Intelligent Logistics

AGV intelligent logistics handling equipment, featuring fully automated unmanned transportation, flexible scheduling, and adaptability to production lines and warehouses, replaces manual transfer, enhances logistics efficiency, and achieves automated material flow within the factory area.

Intelligent Cable Testing Equipment

As testing requirements and volumes in the cable industry continue to increase, intelligent testing has emerged as a new industry trend. Intelligent cable testing equipment products are independently developed by Zhongtian Smart Equipment Co., Ltd. This product portfolio automates the circulation and testing of bare conductors and links key test parameters to the corresponding conductor products to interface with the MES via the host computer.

Energy and Carbon Management System (CMS)

It is an integrated platform for industrial enterprises to monitor energy consumption, calculate carbon emissions, track carbon footprints, and manage reporting. Built upon international standards, it enables digital and standardized management of energy and carbon data, supporting enterprises in their green, low-carbon transition and regulatory compliance.