Products

Innovative Technologies. Trusted Performance.

We have a deep understanding of various application characteristics of communication base stations. Excellent in stability and safety, low cost, our communication base station specific batteries make us the unique supplier for the three major operators domestically and an excellent partner recognized by China Tower. Adhering to the idea of “quality up but cost down”, our company has been a leading player in the communication power supply sector for many years.

QSFP28 100G BIDI 1271/1331nm 10km

The module incorporates 1 channel optical signal, operating at 100Gbps data rate. This module can convert 4 channels of 25Gbps (NRZ) electrical input data to 1 channel of 100Gbps (PAM4) optical signal and also can convert 1 channel of 100Gbps (PAM4) optical signal to 4 channels of 25Gbps (NRZ) electrical output data.The electrical interface uses a 38-contact edge type connector. The optical interface uses a Single LC connector.The high performance cooled EML transmitter and high sensitivity PIN receiver provide superior performance for 100Gigabit Ethernet applications up to 10km links.

SFP28 25G Dual 1310nm 80km

The transceiver is intended for 80km reach service from 24.33Gb/s to 25.78Gb/s single mode high-speed communications equipment where low-cost, extraordinary performance and reliability are essential. It utilizes internal clock and data recovery (CDR) units on transmitter and the receiver chains for low jitter compliance. The differential AC coupled Tx and Rx data interfaces are CML compatible. The device is Class I laser safety compliant.

SFP28 25G Dual 1310nm 40km

The transceiver is intended for 40km reach service from 24.33Gb/s to 25.78Gb/s single mode high-speed communications equipment where low-cost, extraordinary performance and reliability are essential. It utilizes internal clock and data recovery (CDR) units on transmitter and the receiver chains for low jitter compliance. The differential AC coupled Tx and Rx data interfaces are CML compatible. The device is Class I laser safety compliant.

SFP28 25G Dual 1310nm 20km

The transceiver is intended for 20km reach service from 24.33Gb/s to 25.78Gb/s single mode high-speed communications equipment where low-cost, extraordinary performance and reliability are essential. It utilizes internal clock and data recovery (CDR) units on transmitter and the receiver chains for low jitter compliance. The differential AC coupled Tx and Rx data interfaces are CML compatible. The device is Class I laser safety compliant.

SFP28 25G Dual 1310nm 10km

The transceiver is intended for 10km reach service from 24.33Gb/s to 25.78Gb/s single mode high-speed communications equipment where low-cost, extraordinary performance and reliability are essential. It utilizes internal clock and data recovery (CDR) units on transmitter and the receiver chains for low jitter compliance. The differential AC coupled Tx and Rx data interfaces are CML compatible. The device is Class I laser safety compliant.

SFP28 25G Dual 850nm 100m

The transceiver is intended for 100m reach service up to 25.78Gb/s 850nm multi-mode high-speed communications equipment where low-cost, extraordinary performance and reliability are essential. It utilizes internal clock and data recovery (CDR) units on transmitter and the receiver chains for low jitter compliance. The differential AC coupled Tx and Rx data interfaces are CML compatible. The device is Class I laser safety compliant.

ZTT develops reliable and intelligent transmission and distribution networks to enhance the global power grid. Guided by three core principles—safety and efficiency, sustainability through reduced carbon emissions, and smart technology integration—ZTT delivers innovative solutions that redefine energy transmission.

Screened Unarmored Control Cable

Screened unarmored cable is a special type of cable designed to protect the signal from interference while providing the necessary mechanical strength without the need for additional armor.

Medium Voltage Aerial Bundle Cable

Medium Voltage Aerial Bundle Cable utilize cross-linked polyethylene (XLPE) to ensure high electrical and thermal endurance, making them suitable for distributing power from substations to distribution transformers in urban grids.

Low Voltage Aerial Bundle Cable

Typically using materials like XLPE or HDPE, provide sufficient insulation to safely transmit power from distribution transformers to end-users such as residential and small commercial areas. They allow for flexible installation with reduced safety clearances, enabling routing closer to buildings for convenient and efficient electricity supply.

copper/aluminum wire+laminated aluminum tape armored cable

Suitable for transmission and distribution systems with rated voltage up to 500kV.The copper/aluminum wire + laminated aluminum tape composite armored cable provides effective electromagnetic shielding and enhanced mechanical protection for reliable operation in demanding environments.

HV lead sheathed cable

Suitable for transmission and distribution systems with rated voltage up to 500kV.HV lead sheathed cable provides exceptional impervious sealing against moisture and corrosion. Its durable and pliable sheath also ensures both reliable long-term performance and easier installation in challenging conditions.

HV smooth aluminum sheathed cable

Suitable for transmission and distribution system with rated voltage up to 500kV.HV smooth aluminum sheathed cable offers strong protection against moisture and corrosion, ensuring long-lasting performance. Its lightweight and sturdy design also simplifies installation, making it a dependable choice for high-voltage power lines.

Enjoying precise scheme design, lean production control and refined industrial chain layout, our energy storage battery products can be used in various scenarios such as user side and power generation side.

With the certifications of UL, 9540A and TUV, high stability and high safety throughout the life cycle(4000~10000 times) have been achieved, suitable for 0.25P~1P application.

Cutting-edge cell

Drawing on more than ten years of battery R&D and manufacturing experience, we have independently developed a new generation of advanced battery products that break through the technical bottlenecks of traditional batteries. These innovative products are deployed in high end frequency regulation, precision energy storage and new energy low speed vehicle scenarios and constitute a core driver for our technological upgrading.

Power cell

Our power oriented batteries feature high stability, superior safety and high energy density with industry leading performance indicators. Custom built batteries of various models, capacities and performance grades can be provided to match different equipment, widely serving low speed power machinery.

Telecommunications backup cell

With years long experience in the communication power supply industry, we fully understand the special operating environments and requirements of communication base stations. Our dedicated base station batteries are characterized by high stability, superior safety and low cost, making them core supporting products for domestic communication infrastructure.

Energy Storage cell

Supported by mature solution design capabilities, lean production management and a complete industrial chain layout, our energy storage batteries are suitable for a full range of power related scenarios. With multiple internationally recognized certifications, the products feature ultra long cycle life, high safety and stability, and can meet energy storage requirements under various power operating conditions.

Single/combined radial lead supercapacitor

High-performance Electric Double-Layer Capacitor(EDLC), cylindrical structure, ultra-low internal resistance, designed for high and medium power discharge, rated voltage of up to 3V, multiple units can be connect in series and parallel way.

Snap-In supercapacitor

Electric Double-Layer Capacitor(EDLC), cylindrical structure with snap‑fit termination, ultra‑low internal resistance, designed for medium‑to‑high power discharge, and a cell voltage of up to 3 V.

ZTT’s submarine fiber optic cables provide high-speed, low-latency connectivity for global telecom and offshore energy networks. Designed with high fiber counts, robust protection, and advanced signal technology, they withstand deep-sea pressure, abrasion, and harsh marine conditions.

Instrument & Control Cables

Instrument & Control Cables are signal transmission cables specially designed for onshore petroleum and natural gas exploration, extraction, production, refining, storage and transportation facilities, as well as other industrial applications. They are primarily used to connect field instruments, sensors and actuators to control systems to transmit monitoring and control signals

IWOCS Umbilical Cable

ZTT is equipped with full-fledged manufacturing lines for IWOCS umbilical cables, covering electrical signal cables, optical-fiber elements, cable cores assembly, aramid fiber reinforced braiding and sheath extrusion processes. Custom-engineered functional components can be provided to withstand harsh subsea service conditions.

ZHONGTIAN 7 & 8

Wind Turbine Installation Vessel

ZHONGTIAN 5

Cable Laying Vessel

Lan Hai Ling Hang

Deepsea Self-propelled Cable Laying Vessel

ZHONGTIAN 31

Wind Turbine Installation Vessel

Material Box Intelligent Warehouse Solution

Intelligent storage with bin-type stacker cranes utilizes bins as storage and retrieval units, achieving high-precision automatic storage and retrieval, high density and space-saving, efficient and stable operation, and adaptability to multiple types of small materials, enabling intelligent and automated management of the entire storage process.

Pallet-Based Intelligent Warehouse Solution

Pallet stacker intelligent warehousing utilizes pallets as the load-bearing unit, enabling high-level three-dimensional storage, fully automated storage and retrieval handling, stable and efficient operation, significantly increasing storage capacity, adapting to bulk palletized goods, and achieving intelligent unmanned warehousing operations.

Four-Way Shuttle Car Intelligent Warehouse Solution

The intelligent storage system utilizing four-way shuttles eliminates the need for fixed aisles, allowing for flexible movement in all directions. It features fully automated storage and retrieval, high-density three-dimensional storage, and compatibility with multiple specifications of material boxes and pallets, enabling flexible, intelligent, and unmanned warehouse operations.

AGV Intelligent Logistics

AGV intelligent logistics handling equipment, featuring fully automated unmanned transportation, flexible scheduling, and adaptability to production lines and warehouses, replaces manual transfer, enhances logistics efficiency, and achieves automated material flow within the factory area.

Intelligent Cable Testing Equipment

As testing requirements and volumes in the cable industry continue to increase, intelligent testing has emerged as a new industry trend. Intelligent cable testing equipment products are independently developed by Zhongtian Smart Equipment Co., Ltd. This product portfolio automates the circulation and testing of bare conductors and links key test parameters to the corresponding conductor products to interface with the MES via the host computer.

Energy and Carbon Management System (CMS)

It is an integrated platform for industrial enterprises to monitor energy consumption, calculate carbon emissions, track carbon footprints, and manage reporting. Built upon international standards, it enables digital and standardized management of energy and carbon data, supporting enterprises in their green, low-carbon transition and regulatory compliance.