As a supplier in the optical device industry, Zhongtian Broadband provides critical solutions for global communications, data centers and fiber optic networks. We are committed to providing customers with high-performance and high-efficiency optical device products to promote the speed and reliability of information exchange and help the development of the digital era. As a stealth champion in the global optical device segment, we are committed to creating a closer and smarter communication environment for mankind.
Hardend ODN Solution:In order to solve the problems faced by traditional ODN, such as aging of existing facilities, difficulties in covering rural areas, and low construction efficiency, ZTT Broadband has launched a fully pre-connected next-generation ODN solution, which adopts a pre-connected chaining scheme from the distribution point (HUB) to the access point (SUB). Pre-connected ODN has a significant improvement in installation efficiency compared to traditional ODN. The advantages are mainly in terms of simplicity, efficiency, economy and performance.
Low skill requirements, fast construction and low labor costs;
High maintenance efficiency, fast repair of network faults, recovery time reduced by 80%;
Pre-connected connectors, industrial-grade quality assurance link attenuation stability;
IP68, IK09;
Fully sealed structure can effectively prevent the entry of foreign objects, and the pre-fabricated structure can avoid the instability brought about by the fused fiber, low light problems reduced by 80%
FTTR Solution:With the popularity of FTTH, the traditional indoor coverage solution is gradually unable to meet the user's demand for network performance.FTTR (Fiber to The Room), as an all-optical-domain networking solution, provides wired and wireless Gigabit coverage for each room by connecting the optical fiber to each room.
FTTR whole-house optical network coverage solution is to use optical fiber instead of network cable, by laying optical fiber to each room, from OLT to ODN and then to the user's master gateway, the master gateway through the optical information panel to deliver optical signals to the slave gateway in each room and deploy the super grouping, so that everyone in the family has a super gigabit broadband experience in every room, at every moment.
FTTR Whole House Optical Network Solutions and Products - Master/Slave Gateway
FTTR Whole House Optical Network Solutions and Products - Master/Slave Gateway | ||
Product | Master Gateway | Slave Gateway |
Network side interface | XGPON-downlink speed10G/uplink speed 2.5G(self-adaptation with 10G-EPON) | GPON optical interfaces 2.5G/uplink speed1.25G |
User side interface | GPON optical interfaces-downlink speed2.5G/uplink speed1.25G,1:16 spitting ratio | Ethernet interface-2*GEpowerinterface(self-adaptation 1000M/100M) |
Ethernet interface-1*2.5GE+3*GE | WLAN interface-WiFi6 AX3000Mbps/WiFi6 AX1800Mbps | |
POTS interface-1 | USB interface-1* USB2.0/3.0 | |
WLAN interface-WiFi6 AX3000Mbps 2.4GHz | ||
USB interface-1* USB2.0 |
Pipe-through patch cord
For in-wall piping and other space-constrained installation environments, we have developed pipe-through fiber optic cable assemblies with traction forces up to 600N.
Optical information socket
Small size and beautiful.
Material: PC+ABS or ABS.
Dust-proof and anti-aging.
IP20.
Internal PLC splitter can be equipped.
Wall-mounted.
Uneven PLC splitter
1:5/1:9 uneven PLC splitter is mainly used for optical distribution network connection between master and slave gateway devices.
ZTKD-EB-01 | ZTKD-EB-02 | ZTKD-EJ-01 | |||
Item | Technical parameter | Item | Technical parameter | Item | Technical parameter |
Size (W*H*D) | 240mm*330mm*120mm | Size(W*H*D) | 200mm*175mm*80mm | Fiber | G.657A2 |
Capacity | Max. 80core,·16core *5pcs | Adaptor | 10 pcs | Connector | SC/APC |
Adaptor | 16 SC/APC ports | Splitter | (1pcs of 1:8+1 pcs of 1:2 or(1pcs of 1:9) | Insertion loss(dB) | ≤0.3 |
Splitter | 1x 1:16 or 2x1:8 splitter | Protection level | IP68,IK09 | Return loss(dB) | ≥55 |
Interface | 4cable inlets(6.5mm~16mm),including 1oval inlet | Tensile strength | 300N | ||
Protection level | IP68,IK09 | Cable size | Φ5.0mm、2.0(±0.1)x 5.3(±0.2)mm |
Pipe-through patch cord | ||
Item | Technical parameter | |
Fiber | SM | MM |
Connector | SC | SC |
Grinding | APC | ≤0.20 |
Pin diameter | 2.5mm | |
Pin material | Ceramic(zirconium oxide) | |
Insertion loss(dB) | ≤0.3 | |
Return loss(dB) | ≥55 | / |
Working temperature | -25 ℃ to +70 ℃ | |
Mechanical durability | >500 times | |
Industry standard | IEC61754-04 | |
Pulling force | 600N |
5 interface/6 interface optical information panel | |
Item | Technical parameter |
Size | 86×86×23mm,tolerance±1mm |
Material | PC+ABS |
Color | White |
Low temperature storage | Low temperature -45℃,96h,No mechanical damage, no visible color change |
High temperature storage | High temperature 60℃,96h,No mechanical damage, no visible color change |
Moist heat (steady state) | 95%(+40℃),48h,No mechanical damage, no visible color change |
Fall | 0.5m,No mechanical damage |
Impact | IK06,No mechanical damage |
Temperature cycling (sinusoidal) | -25-50℃,Humidity 93%RH (at 50℃), transformation time 2h, extreme values 4h each, 20 cycles; no mechanical damage, no obvious color change |
Salt spray | 24 hours,No mechanical damage |
Flame retardant | UL94-V0 |
Eco-friendly | RoHS2.0 |
Uneven PLC Splitter | |||
Item | Unit | Parameter | |
1:5(85-15) | 1:9(70-30) | ||
Operating Bandwidth | nm | 1260~1650 | |
Insertion Loss - Cascade Ports | dB | 2 | 2.2 |
Insertion Loss - Output Port | dB | 16 | 16.3 |
Polarization dependent loss | dB | ≤0.3 | ≤0.3 |
Uniformity | dB | ≤0.8 | ≤0.8 |
Return Loss | dB | ≥50(UPC),≥55(APC) | |
Operating/Storage Temperature Range | ℃ | -40~+85 | |
Note: 1. for uneven devices; 2. fiber is single-mode fiber; |
All products meet the international standards series (such as IEC 61300, IEC 60529, Telcordia GR1209-Core, Telcordia GR1221-Core, etc.) and can be manufactured according to customers’ requirements (provide customized production accordingly).
-Outdoor or underground application, with much moisture and sand dust.
-Places where high protective performance is required to prevent water and dust.
-Data Center and large buildings where excellent application performance is required.
-Places where steady optical transmission signals and convenient installation are required for FTTH system.
ZTT is one of the best companies in the industry
ZTT integrated all series of distribution products in 2009, specializing in manufacturing, sales and service of the communications network supporting product, keeping top in many related product tenders from China Mobile, China Telecom, China Unicom, radio and television networks.
Technology Competition Advantage
ZTT has introduced into more than 100 sets home and abroad advanced production and testing equipments. The annual production capacity of cabinet products is 200,000 sets.
Excellent and Complete Quality Control System
ZTT has a strict control on raw materials, choosing steel products from domestic famous manufacturers to ensure the products meet customer’s requirements in the compressive, tensile and other technical indicators. Relying on ZTT group’s international standard testing center, it can do the technical performance system test for delivery products.
Provides integrated FTTH System Solutions
ZTT focuses on the design and research of FTTH system, setting up a special professional construction services team, using a variety of construction techniques, providing a complete FTTH solution for users. We will adhere to project construction with first-class quality, reasonable prices, careful design, and good quality services.
Sri Lanka FTTH Project in Year 2104 about 50,000 households,34 areas across the country
FTTH Project (1st Project:800 households;2nd Project:1600 households; 3rd Project:5400 households)